What goes wrong on the line, what we re-engineer, and the evidence you receive — one program, three verifiable steps.
Drawers specified for last year's load now sag and bind: the 45 mm slide carrying 60 kg of tooling pulls hard, wears noisy and starts coming back as warranty claims. And the catalogue "next size up" does not fit the cabinet section you already tool.
We re-engineer instead of swapping part numbers: recalculate the section profile for the true working load, move load-critical elements to cold-rolled steel where the drawing allows, specify the finish for the real environment, and keep the existing hole pattern wherever possible.
A slide rated for the real load with cycle-test records (50,000 cycles under rated load), an updated drawing for your ERP, and prototype sign-off before mass production.
When an application moves to a heavier duty class, we re-engineer the section and finish rather than simply swapping a part number.
Load re-rating, material upgrade (CR to stainless where required), finish change and a fresh cycle-test report.
Updated drawing, prototype, cycle-test data and a release note for production.
From your requirement to inspected delivery — one accountable path for every slide rail project.
Send your drawing, load, travel, mounting and operating environment - we confirm feasibility within one business day.
Our engineers select rail type, material, finish and hole pattern, then return a documented spec and firm quote.
Functional samples are built for fit, motion, load and installation validation before any volume commitment.
Approved specs enter controlled batch production with in-process inspection at every station.
Dimensional, functional and salt-spray checks; a load certificate is issued for every batch.
Surface treatment, container-ready packing, pallet labelling and full shipping documents to your port.
Product lines commonly used in this program — every size can be re-engineered to your drawing.
Heavy-duty 76 mm side-mount slide with lock-in/lock-out, rated 150 lbs per pair for tool chests, mobile workstations and service vehicles.
51 mm three-section heavy-duty drawer slide for tool chests, mobile workstations and service vehicles — full extension with disconnect, 10 pairs per…
Cold-rolled steel heavy-duty drawer slide rated 120 kg per pair, electroplated zinc finish, lengths 350-1200 mm (14-48 inch) for furniture and equipment…
Describe the application and target load — we reply with a documented proposal within 24 hours.
Hi — tell us your product, load and quantity, or send a drawing. We confirm the next technical step and a quotation route.
