51 Series Heavy-Duty Drawer Slide
51 mm three-section heavy-duty drawer slide for tool chests, mobile workstations and service vehicles — full extension with disconnect, 10 pairs per…
- Fit
- Commercial Vehicles
100–250 lbs
32–40"
Industrial equipment applications combine high cycle rates with vibration, dust and continuous duty. Slides are specified by load per pair, extension ratio and flatness under full load — with salt-spray and cycle-test data required for export projects.
Our response for this industry: reinforced ball retainers, thicker section steel and salt-spray verified finishes. Standard lengths share one mounting envelope, so one frame design accepts multiple travel sizes without redrawing.
Typical load
75–500 lbs per pair
Environment
Indoor duty: dust, vibration, 8–16 h continuous cycles
What buyers review
The specifications and conditions checked before selecting a slide for this application.
Load rating at full extension
Confirm lbs/kg per pair at the longest travel, not per pair average.
Cycle life
50,000+ cycles with vibration present; ask for cycle-test records on the exact series.
Mounting clearance
Side space and screw pattern must fit the machine frame without rework.
Dust and swarf
Enclosed ball retainers or stainless balls keep rails running in dirty air.
Lock-in / lock-out
Panels and maintenance drawers often need the slide to hold under pull-out.
Products for Industrial Equipment
76 Series Heavy-Duty Drawer Slide
Heavy-duty 76 mm side-mount slide with lock-in/lock-out, rated 150 lbs per pair for tool chests, mobile workstations and service vehicles.
- Fit
- Commercial Vehicles
- Install
- Heavy-Duty Lock
100–250 lbs
32–40"
Heavy-Duty Lock
Custom Heavy-Duty Slide (Made to Drawing)
Custom sliding solution built to your load, length, mounting and finish requirements.
- Fit
- Custom
- Install
- To drawing
500+ lbs
32–40"
Heavy-Duty Lock
- Made to your drawing
- Engineering support
- Sampling available
OEM/ODM
53 Series Heavy-Duty Drawer Slide (5301)
Cold-rolled steel heavy-duty drawer slide rated 120 kg per pair, electroplated zinc finish, lengths 350-1200 mm (14-48 inch) for furniture and equipment…
- Fit
- Heavy Duty Slides
- Install
- Heavy-Duty Lock
100–250 lbs
32–40"
Heavy-Duty Lock
Related case studies
Full-Extension Slides for Machinery Access Panels
Over-extension runners for maintenance access.
18
lead time
0.3
mm
Full-Extension Slides for Industrial Vending Machines
Lever-disconnect slides for service machines that need full product access and reliable daily cycling.
200,000
test cycles
91
inspection rate
Locking Drawer Slides for Military Storage Cases
Locking heavy-duty slides for transport cases that must stay closed under shock and vibration.
96
-hour
18
lead time
Spec it for Industrial Equipment
Send the drawing and operating conditions — engineering confirms the right configuration within 24 hours.