51 Series Heavy-Duty Drawer Slide
51 mm three-section heavy-duty drawer slide for tool chests, mobile workstations and service vehicles — full extension with disconnect, 10 pairs per…
- Fit
- Commercial Vehicles
100–250 lbs
32–40"
Slides for commercial vehicles face vibration, shock loads and temperature swings that consumer hardware never sees. Locking mechanisms, positive stops and corrosion-resistant finishes are reviewed first for truck, van and emergency-vehicle drawer systems.
Vehicular programs start from your vibration profile; we match retainer preload and lubricant to it, then document the validation so your homologation file is complete.
Typical load
100–300 lbs per pair
Environment
Road duty: constant vibration, temperature swings, wash-down exposure
What buyers review
The specifications and conditions checked before selecting a slide for this application.
Vibration endurance
Random-vibration or road-sim testing beyond basic cycle counts.
Temperature range
Seals and lubricants rated for −30 °C to +80 °C service.
Locking under motion
Drawers must latch while the vehicle moves; verify detent and lock types.
Corrosion
Road salt and wash-down demand e-coat or stainless; confirm test hours.
Compact sections
Space-limited bodies need slim sections with no loss of rating.
Products for Commercial Vehicles
L1045 Full-Extension Three-Section Self-Lock Ball Bearing Slide
45 mm full-extension three-section ball bearing slide with mechanical self-lock, 15 pairs per carton (10" – 24").
- Fit
- Ball Bearing Slides
- Install
- Heavy-Duty Lock
Under 100 lbs
10–20"
Heavy-Duty Lock
76 Series Heavy-Duty Drawer Slide
Heavy-duty 76 mm side-mount slide with lock-in/lock-out, rated 150 lbs per pair for tool chests, mobile workstations and service vehicles.
- Fit
- Commercial Vehicles
- Install
- Heavy-Duty Lock
100–250 lbs
32–40"
Heavy-Duty Lock
Push-to-Open Ball-Bearing Drawer Slide
Handle-free push-to-open slide for clean industrial and retail fixtures.
- Fit
- Commercial Vehicles
- Install
- Side mount
100–250 lbs
10–20"
Push-to-Open
- Push-to-open
- Full extension
- 80,000-cycle tested
OEM / ODM
Custom Heavy-Duty Slide (Made to Drawing)
Custom sliding solution built to your load, length, mounting and finish requirements.
- Fit
- Custom
- Install
- To drawing
500+ lbs
32–40"
Heavy-Duty Lock
- Made to your drawing
- Engineering support
- Sampling available
OEM/ODM
Spec it for Commercial Vehicles
Send the drawing and operating conditions — engineering confirms the right configuration within 24 hours.